Home  Contact Us  

Our Products

Telephone: +86-755-26678603

Fax: +86-755- 26678912

Email: shenzhen@dantek.net.cn

Dantek@Dantek.net.cn

Dantek@dantek.com.cn

Web: www.dantek.net.cn

Products

>> Home - Products - DT07 Series

 
The DT07 Switch fully complies with IEEE802.3/IEEE802.3u Ethernet standard, it provides 7 10/100M ports with auto-MDI/MDIX and one 100M fiber ports which can extend the network radii. The DT07 Switch is equipped with fast store & forward working mode.
 
1. KEY FEATURES
l  Complies with :IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX and 100Base-FX standard
l  Supports Seven 10/100M auto-detect Half/Full duplex switch ports and One 100M fiber ports.
l  Supports Store&Forward architecture and performs forwarding and filtering at non-blocking full wire speed.
l  Spanning tree protocol supported
l  Supports Direct Forwarding function
l  External power adaptor, low consumption
 
2. TECHNICAL SPECIFICATION
1, Standard: 802.3 10B-T, 802.3u 100b-Tx & 100b-Fx, 802.3x, 802.1.p
2, Wavelength: TX1310nm/RX1310nm or BIDI TX1310/RX1550nm; TX1550nm/RX1310nm
3, Fiber cable: 8.3/125, 8.7/125, 9/125 or 10/125 single-mode
4, Connector: RJ-45 Jack and Fiber optic connectors: SC connector
5, Cable Model and Length: Twisted pair Cat.5 UTP Cable: 100m
6, Switching mechanism: Store & Forward
7, Forward & Filter Rate: 10b-T(14,880pps-64bytes), 100b-Tx/Fx(148,800pps-64Bytes)
8, MAC Address and self-learning:1K
9, LED Indicators: POWER, LINK/ACT,SPEED
10, Power supply: 2A@5V
11, Environment: Operating temperature:32 to 122F(0 to 60℃)
                                Storage temperature: -4 to 140F(-20 to 70℃)
                                Relative humidity: 5% to 90%
13, Size:158mm(W)*85mm(D)*25mm(H)
14, Emission: FCC/CE
 
3. Order Information:
DT07-M1-2            1-Port 100M FX + 7-Port 10/100M TX Switch with Multimode 2km SC connector.(Dual core)
DT07-S1-20          1-Port 100M FX + 7-Port 10/100M TX Switch with Single mode 20km SC connector.(Dual core)
DT07-B1S1-20     1-Port 100M FX + 7-Port 10/100M TX Switch with BIDI Single mode 20km SC connector.(Single core / WDM) for fiber port1 (FX1) is TX1310/RX1550

DT07-B2S1-20      1-Port 100M FX + 7-Port 10/100M TX Switch with BIDI Single mode 20km SC connector.(Single core / WDM) for fiber port1 (FX1) is TX1550/RX1310

 
 © Copyright 2008 Dantek Technology Limited ICP:09161255