Home

Our Products

Telephone: +86-755-26678603

Fax: +86-755- 26678912

Email: shenzhen@dantek.net.cn

Dantek@Dantek.net.cn

Dantek@dantek.com.cn

Web: www.dantek.net.cn

Products

>> Home - Products - POE-48V Injector

Dantek POE-48V.pdf

IEEE 802.3af

Power over Ethernet Injector

DANTEK's POE-48V IEEE 802.3af PoE Injector provide DC 48V over Ethernet cables. The Injector IEEE 802.3af Power over Ethernet Injector inserts DC Voltage into Cat.5 cable, allowing the cable between the Injector and Splitter to transfer data and power simultaneously. The maximum distance between the Injector and Splitter is 100 meters.

With IEEE 802.3af Power over Ethernet devices installed, the system administrator only have to use a single RJ-45 Ethernet cable to carries both power and data to each devices. Besides, to connect through Injector and Splitter, you could also have following benefit that, cost saving, easy for networking planning and higher reliability. What more, upon any IEEE 802.3af devices installed, the Injector or the Splitter all can make the connection while migrating or splitting the power and the Ethernet digital packets, such as connecting the Injector to an IEEE 802.3af complied devices, AP or IP phone.

1. Features

·Comply with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u 10/100Base-TX

·Provide DC 48V power over RJ-45 Ethernet cable to device with Ethernet port

·LED indicators power input indication

·Distance up to 100 meters

·Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by incorrect installation

·Work with EIA568, category 5,4-pair cables for 10Base-T or 100Base-TX

·EMI standards comply with FCC, CE class B

2. Technical Specification

Product IEEE 802.3af Power Over Ethernet Injector

3. Applications

·Connect with IEEE 802.3af devices

Due to the capability of IEEE 802.3af standard, the Injector can directly connect with any IEEE 802.3af end-nodes like wireless access point, VoIP phones and Internet camera where support IEEE 802.3af In-line Power over Ethernet port.

The IEEE 802.3af Injector and Splitter installation

For a place hard to find the power inlet, IEEE 802.3af Injector and Splitter, as a pair, should provide the easiest way to power your Ethernet devices such as Internet Camera on the cell or Wireless Access Point that is installed on the top of the building.